Solar Panel Repair in Southern California

Underperforming array? We diagnose and repair panels, wiring, inverters and roof penetrations so your system actually produces what it should.

Get My Free Estimate (858) 541-1097

When production drops or an inverter starts throwing errors, the fix is usually smaller than people expect. We find the actual problem, repair it, and get the system back to full output.

Signs your solar system needs repair

Lower monthly production, error codes on the inverter, a panel that's clearly darker than the others, or a jump in your utility bill are the most common red flags. Sometimes it's one loose connection. Sometimes it's a failed micro-inverter or a damaged panel.

We check monitoring data, physically inspect the array, and confirm exactly what's off before recommending anything.

A quieter sign is a bill that looks normal on paper but doesn't match what the system was projected to produce two or three years ago. Comparing your monitoring app's year-over-year output against the original design estimate usually surfaces a problem well before it shows up as a visible fault.

What solar repair usually involves

Repairs commonly include replacing failed micro-inverters or optimizers, fixing wiring and MC4 connectors, replacing damaged panels, or resealing roof penetrations that have started to leak.

If the issue is on the roofing side – flashings, boots or underlayment – we handle that in the same visit instead of sending you to a separate contractor.

On tile roofs specifically, cracked or slipped tile around a mounting foot is one of the more common repair calls we get. We reset or replace the tile and re-flash the penetration properly instead of just caulking over the gap, which is a short-term fix that fails again in a season or two.

How long a repair takes

Most solar repairs are same-day once we're on the roof and have the parts. Inverter or panel replacements can take a bit longer depending on availability.

We give you a straight answer on cost and timing before any work starts.

Solar Repair Booking

System not producing? Book a repair visit online

Pick a day and time that works for you and one of our solar technicians will diagnose the issue on site - no phone tag required.

Book a Solar Repair (858) 541-1097

Repairing systems we didn't install

A lot of the repair calls we get are on systems installed by companies that are no longer around or won't come back out. We service those too.

We'll document what we find, explain your options honestly, and only recommend replacement when repair really isn't the smart move.

Marine-layer soiling vs. an actual fault

Before we call anything a hardware failure, we rule out the boring explanation first: dirty panels. Coastal soiling and dust buildup after a dry inland stretch can drag production down 5–10% and it looks a lot like a wiring or inverter issue on a monitoring graph until the array gets rinsed.

If a clean doesn't bring output back up, that confirms it's a real electrical or hardware problem, and we move straight into targeted diagnostics instead of guessing.

Marine-layer soiling vs. an actual fault

Repairs after storms and Santa Ana wind events

Santa Ana winds can loosen racking bolts, lift a panel edge, or snap a connector that's been baking and flexing in the sun for years. After a big wind event we check torque on racking hardware and inspect for any panel that's shifted out of alignment, since a panel sitting slightly off can chafe wiring against the roof or racking over time.

We also check roof penetrations after any major storm – wind-driven rain finds a weak flashing seal fast, and it's easier to reseal it now than to chase a stain on the ceiling six months later.